contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

  Lbs.
Minimum :
Maximum :
Minimum :
Maximum :
Lbs.
Lbs.

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo

Why More And More Users Are Choosing 3 in 1 Decoiler Straightener Feeder Machine

  • source:coilfeed;
  • Time:11/07/2018

Professional punching automation equipment manufacturer-HAIWEI specialize in decoiler straightener feeder machine, which consistently provides industry-leading and cost-effective equipment. Today, Haiwei would tell you why users choose 3 in 1 decoiler straightener feeder machine.


There are many reasons why more users choose 3 in 1 decoiler straightener feeder, such as it occupy less space than separated decoiler, straightener, feeder type, suitable for wide & thick steel strips even high tensile steel material etc. Another important reason is it can automatic feed strips from decoiler to straightener’s entrance mechanically.


Decoiler’s mandrel payoff strip tips for some length, support arm guide strip first part and send them to bend arm’s work area, then bend arm press strip tip to straightener’s entrant roller, then roller rolls to clamp strips forwards and go through 3 in 1 machine’s straightener feeder part(Please refer to the following video).

 

 

Furthermore, it’s also convenient to unload leftovers of coil as follows:
Removal of coil leftovers. In case there is some leftover of coil and strips, it can roller strips in coil and then unload automatically via loading car (Turn “SPINDLE” to “REV” in hand control box, mandrel runs reversely to roll strip in coil at press arm’s press, then fasten the coil in steel tiles, next contact spindle to release coil, at last unload the coil via loading car, refer to the following image).

decoiler straightener feeder machine decoiler straightener feeder machines

 

 If you want to learn more about us, please contact us, we will give the best service to you.

top