contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness *
Thinnest - Width x Thickness *
Widest - Width x Thickness *
Narrowest - Width x Thickness
Tensile PSI *
Yield PSI *
Shear PSI *

B. Coils

Minimum : *
Maximum : *
Minimum : *
Maximum : *

C. Press

Maximum SPM: *
Minimum SPM: * (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum : *
Minimum : *
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


3 in 1 Decoiler Straightener Feeder

Haiwei provides a wide range of 3 in 1 decoiler straightener feeder. The coil weight is up to 20T, the thickness is up to 14mm and the width up to 2200mm. Haiwei 3 in 1 uncoiler straightener feeder have the different structure for the different situation. The main structures are as below:

1.High speed 3 in 1 uncoiler straightener feeder for blanking line. The speed can be up to 40m/min.

2.High precision 3 in 1 uncoiler straightener feeder for long feeding length (the pitch is more than 1.5m), high precision parts, sometimes it’s for progressive die without a pilot.

3.The straightener-feeder head can flip up for roller cleaning. Mainly use for aluminum material and hot rolling material.

4.The engaging depth of straightener up/down roller is adjusted by the servo motor or hydraulic motor for different thickness. The value can be saved for easy and fast adjustment the next time.

5.The upper roller of feeding can be made by PU material. It’s suitable for some soft material or high surface quality requirement material, like aluminum, brass or copper etc.

6.The panel language can be translated into the different language as customer requirement for easy operation by operator.