Precision Straightener (Double-section model) DSL Series

Model: DSL
Place origin: China
Warranty date: 1 year
Installation and debugging: Engineers onsite technical support is available.
Package: plywood case/film
Price terms: FOB SHENZHEN or other Chinese port etc.
Payment terms: T/T, L/C etc.
MOQ: 1 set
Delivery: 30-60 days
Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

PRODUCT DETAIL

Features

1. It adopts 2 sects leveling, on the leveling process, the roll material only be leveled the start sect and the end sect, the middle sect don't need to be leveled, it can make the whole material keeping in a same surface.
2. It's hard to finish the good electric product if the material does not clear up the inner stress. The only way to make the better electric product is using the straightener to remove the inner stress.
3. After straightening, materials can be corrected upward or downward of the flat.
4. The Perlin roll in both sides of the roll adopted the design of oil type that is no need to lubricate that can get rid of the trouble of oil and the dirty.
5. The driving unit is controller by inverters(cycle control), can feed smoothly at a speed synchronize with the press.

Specification

Model	DSL-100	DSL-150	DSL-200	DSL-300
Material Width (mm)	100	150	200	300
Material Thickness (mm)	0.1~0.6
Adjust Method	Four point adjustment separately
Max. Feedspeed (m/min)	16
Direction	Left to right
Input Power	AC: 200V/380V/415V/440V

* The contents are subject to change without prior notice.