contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

  Lbs.
Minimum :
Maximum :
Minimum :
Maximum :
Lbs.
Lbs.

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo
  • Punch Press Servo Roll Sheet Metal Coil Feeder Straightener

Large-Sized Servo Roll Feeder NCF series

  • Model: NCF-1000/NCF-1300/NCF-1600
  • Place origin: China
  • Warranty date: 1 year
  • Certification: CE
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

PRODUCT DETAIL

Features


  • Introduction
  • 1. All feed rolls are made of 40Cr, finished fine machining, heat treated, hard chrome plated and grind. Hardness is up to HRC58°~60°
    2. Feed rolls are power driven through a precision gear train.
    3. High-precision feed: NCF models are controlled by computer closed-circuit feedback system, so the feed precision is within +/-0.03mm.
    4. Phase-style feed function: It is available to input 20 groups of different feed length, each group provides punching for 999 times to satisfy the processing and production of special products (option).
    5. Manual model: It is availabe to input 3 phases manual speed so that users operate more easily and feed materials more accurately.
    6. High-efficiency release device: NCF models can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.
    7. Feed length set up: Input feed length on the control screen directly.

Specification


Model

NCF-1000

NCF-1300

NCF-1600

NCF-2200

Max. Material Width (mm)

1000

1300

1600

2200

Material Thickness (mm)

NCF-A 0.1~2.2

NCF-B 0.2~3.2

NCF-C 0.5~5.0

Feed Length (mm)

0~9999.9

Max. Feed Speed (m/min)

16

Rolls Release

Pneumatic

Input Power

3Phase AC 380V/415V

Servo Motor SIEMENS, Germany / YASKAWA, Japan
Servo Drive SIEMENS, Germany / YASKAWA, Japan
PLC SIEMENS, Germany / MITSUBISHI, Japan
HMI SIEMENS, Germany / WEINVIEW, China
Low Voltage electrical Components SCHNEIDER, France

* The contents are subject to change without prior notice.

RELATED PRODUCTS

Small-sized Servo Roll Feeder-Mechanical Release NCF Series
3 in 1 Decoiler Straightener Feeder NCHW2B (stock thickness 0.5~4.5mm)
Hydraulic Heavy Decoiler MTC Series
 Straightener CLH Series
2 in 1 Decoiler Straightener HWGJ Series (stock thickness 0.3~1.5mm)
3D Transfer System
Multi - Process Transfer System – Main Shaft Moving Model
Servo Zigzag Feeder NCZ Series
看不清,请点击我!
top