contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

*
Thickest - Width x Thickness *
Thinnest - Width x Thickness *
Widest - Width x Thickness *
Narrowest - Width x Thickness
Tensile PSI *
Yield PSI *
Shear PSI *

B. Coils

  Lbs.
Minimum : *
Maximum : *
Minimum : *
Maximum : *
Lbs.
Lbs.

C. Press

Maximum SPM: *
Minimum SPM: * (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum : *
Minimum : *
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo
  • Double Section Precision Straightener Decoiler

Precision Straightener (Single-section model) JM3 Series

  • Model: JM3
  • Place origin: China
  • Warranty date: 1 year
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

PRODUCT DETAIL

Features


  • 1. It's hard to finish the good electric product if the material does not clear up the inner stress. The only way to make the better electric product is using the straightener to remove the inner stress.
  • 2. After straightening, materials can be corrected upward or downward of the flat.
  • 3. The Perlin roll in both sides of the roll adopted the design of oil type that is no need to lubricate that can get rid of the trouble of oil and the dirty.
  • 4. The driving unit is controller by inverters(cycle control), can feed smoothly at a speed synchronize with the press.

Specification


Model

JM3-100

JM3-150

JM3-200

JM3-300

Material Width (mm)

100

150

200

300

Material Thickness (mm)

0.1~0.6

Feed Speed (m/min)

15

Straightening Rolls (mm) 

Φ20×19 (Upper9/Lower10)

Machine Weight (kg)

200

250

300

350

Machine Size(m)

0.9×0.3×1.2

0.9×0.4×1.2

0.9×0.5×1.2

* The contents are subject to change without prior notice.

RELATED PRODUCTS

Multi - Process Transfer System - Frame Moving Model
High Speed Roll Feeder RFS Series
Small-sized Servo Roll Feeder-Pneumatic Release NCF Series
3 in 1 Decoiler Straightener Feeder NCHW2A (stock thickness 0.5~4.5mm)
3 in 1 Decoiler Straightener Feeder NCHW1 (stock thickness 0.3~3.2mm)
Heavy Decoiler MT Series
Cut To Length Line Machine
Small-sized Servo Roll Feeder-Mechanical Release NCF Series
看不清,请点击我!
top