contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

  • Metal Decoiler,Decoiler Straightener Feeder Supplier

2 in 1 Decoiler Straightener ULA Series (stock thickness 0.5~3.0mm)

  • Model: ULA (Suitable for material thickness: 0.5-3.0mm)
  • Place origin: China
  • Warranty date: 1 year
  • Certification: CE
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.



  • Introduction
  • 1. Suit for most of coiled materials, including HR, CR, aluminium, stainless steel, plastic, etc.
  • 2. ULA models achieve the maximum use of precious space by putting decoiler and straightener together.
  • 3. Coil is centered by manual or hydraulic expansion of the jaws.
  • 4. ULA models that are made up of non-motorized decoiler and motorized straightener are powerful enough to feed the metal strip smoothly.
  • 5. Equipped with 11 rolls including 7 straightening rolls and 4 pinch rolls, ULA models are suitable for material thickness from 0.5 to 3.0mm.
  • 6. The gaps between the upper and lower rolls are adjusted individually by hand wheels with reference indicator on the side of the frame.
  • 7. High-hardness rolls are heat-treated alloy steel and have been hard-chrome plated and precision ground.
  • 8. Equipped with Japanese electromagnetic contactor and electronic components, ULA models have fewer breakdowns and longer lifetime.
  • 9. Pneumatic press arm is available. (option)
  • 10. Equipped with inverter, ULA models allow a easy adjustment to the payoff speed. (option)
  • 11. Custom and application specific solution is available.
  • Option
  • 1. Hydraulic expansion of decoiler mandrel
  • 2. Decoiler with AC motor
  • 3. Motorized decoiler with Inverter
    4. Pneumatic press arm
    5. Motorized straightener with Inverter









Material Width (mm)






Material Thickness (mm)


Coil I.D. (mm)


Coil O.D. (mm) Φ1200
Max. Coil Weight (kg) 500 800 1200 1500 2000
Mandrel Expansion Manual/Hydraulic

Pinch Rolls (mm)

Φ70×2 Φ98×2

Straightening Rolls (mm)

Φ60× 7 (Upper 3/Lower 4)

Input Power 3Phase AC 380V/415V
Reducer Ratio 1/30

This model can be customized according to your  material width, coil inner diameter, coil outer diameter and coil weight.

* The contents are subject to change without prior notice.


High-speed Cut To Length Line Machine
Servo Zigzag Feeder NCZ Series
Heavy Decoiler MT Series
2 in 1 Decoiler Straightener TUS Series (stock thickness 0.1~1.0mm)
2D Transfer System
1300 Model Swing Shear Type Cut To Length Line
NC Servo Roll Feeder with Worm-gearing Lifter
Large-Sized Servo Roll Feeder NCF series