contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


Brief Introduction:
This is a compact coil feeding line exported to Iran , material Max. width comes 400mm, thickness suitable for 1-6mm, Max. Coil weight comes 5T, feeding speed of 18m/min.

Main feature of the coil feeding line:
1. Straightener and servo feeder was combined in one machine, driven by servo motor and controlled by PLC, It adopted ELECTRIC ADJUSTMENT to adjust the gap between upper straightening roller set and lower straightening roller set.
2. For decoiler part.
2.1 It equip with auto. Loading car. It can load can automatically lift the coil and install the coil on the mandrel of the decoiler, saving labor power and more safety.
2.2. It equips with hydraulic expansion driven by hydraulic station.
3. For straightener-feeder part.
3.1. Pneumatic release
3.2. Electrical adjusting feeding line height