Disposable Face Mask Making Machine

A. Material

1. Type:

2. Surface Conditions:

Slick Rough Sensitive Critical

3. Size:

Thickest - Width		x Thickness
Thinnest - Width		x Thickness
Widest - Width		x Thickness
Narrowest - Width		x Thickness

3. Strength:

Tensile		PSI
Yield		PSI
Shear		PSI

B. Coils

1. Maximum Weight:

Lbs.

2. Outside Diameter:

Minimum :

Maximum :

3. Inside Diameter:

Minimum :

Maximum :

4. Loading Equipment Type:

Crane Lbs.

Tow Motor Lbs.

C. Press

1. Make:

2. Model:

Tonnage

3. Type:

OBI Straightside Flywheel Geared

4. Length of Stroke:

5. Strokes Per Minute:

Maximum SPM:

Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

2. If Progressive, Number of stations:

3. If other types, Describe:

4. Are dies equipped with Pilots?

Yes No

5. Degrees of Press cycle available for Feeding:

6. Portion of press cycle Used for Feeding:

7. Does continuous Skeleton Remain?

Yes No

8. Die Line Height Above Bolster?

Maximum :

Minimum :

9. Die Line Height Above Floor?

Maximum :

Minimum :

E. Application

1. Feed Length:

Maximum :

Minimum :

2. Linear Output:

SPM at Inch Length

Feet Per Minute

3. Accuracy Required For Pilots to Register: (+/-)

4. Accuracy Required Without Pilots: (+/-)

5. Direction of Feeds:

L-R R-L F-B B-F

(as you face the press)

7. If other than Press application, Describe:

8. Looping Pit?

Yes No

Length Width Deep

F. Equipment Desired

G. Plant Utilities

1. Power Supply:

Volts Phase Cycle

2. Air Supply:

PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

video