contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


Thailand clients ordered the third 3 in 1 uncoiler straighener feeder

  • source:Peter Zhang;
  • Time:01/03/2019

The Thailand clients bought 2 set 3 in 1 uncoiler straightener feeder from us in May and November in 2018 and use very well, so they ordered the third one in November, now it's arranged shipping today, The goods was loaded directly at our company.

It's mainly used for 0.8-6.0mm thickness metal strips, suitable for high tensile steel, stainless steel, low carbon steel etc. It also equipped with scrap shear and oil lubrication device. So it's convenient to cut coil head and end, replacing hand cut.

The main components are follows: Japan YASKAWA servo motor, MITSUBISHI PLC, servo drive, GTR main motor for decoiler part and pass line height electric adjustment, SMC solenoid valves and pneumatic cylinders etc.