contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

  Lbs.
Minimum :
Maximum :
Minimum :
Maximum :
Lbs.
Lbs.

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo
  • Coil Cradle Metal Straightener Equipment

Straightener GLL Series

  • Model: GLL(Suitable for material thickness: 1.0-6.0mm)
  • Place origin: China
  • Warranty date: 1 year
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: used for straightening coil metal material such as alloy ,steel ,aluminum etc.

PRODUCT DETAIL

Features


  • 1. It adopts 2 sects leveling, on the leveling process, the roll material only be leveled the start sect and end sect ,The middle sect don’t need to be leveled, it can make the whole material keeping in a same surface.
  • 2. It’s hard to finish the good electric product if the material does not clear up the inner stress. The only way to make the better electric product is using the straightening to remove the inner stress.
  • 3. After straightening, material can be corrected upward or download of the flat.
  • 4. The perlin roll in both side of the roll adopted the design of oil type that is no need to lubricate that can get rid of the trouble of oil and dirty.
  • 5. The driving unit is controlled by inverters, can feed smoothly at a speed synchronize with the press.

Specification


Model

GLL-200A

GLL-300A

GLL-400A

GLL-500A

GLL-600A

GLL-800A

Max material Width (mm)

200

300

400

500

600

800

Material Thickness (mm)

1.0-6.0

Straightening Speed (m/min)

15

Machine Size (m)

1.5×0.8×1.2

1.5×0.9×1.2

1.5×1.0×1.6

1.5×1.1×1.6

1.5×1.2×1.6

1.5×1.4×1.6

* The contents are subject to change without prior notice.

RELATED PRODUCTS

 Straightener CLH Series
2 in 1 Decoiler Straightener ULA Series (stock thickness 0.5~3.0mm)
Multi - Process Transfer System – Main Shaft Moving Model
2 in 1 Decoiler Straightener ULB Series (stock thickness 0.4~3.5mm)
High Speed Roll Feeder RFS Series
3 in 1 Decoiler Straightener Feeder NCHW5A (stock thickness 1.0~9.0mm)
Small-sized Servo Roll Feeder-Mechanical Release NCF Series
Small-sized Servo Roll Feeder-Pneumatic Release NCF Series
看不清,请点击我!
top