contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

  • Press Feed Line
  • kitchenware stamp line decoiler straightener feeder
  • electric feeder kitchen stamp line
  • kitchenware stamp line control box

Press Feeder for Kitchenware Stamping Line

  • Model: Zigzag servo press feeder
  • Place origin: China
  • Warranty date: 1 year
  • Certification: CE
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.



  • PRESS FEEDER FOR KITCHENWARE STAMPING LINE is built for blanking KITCHENWARE STAMPING from coil with the aim of reducing the scrap quantity by exploiting the whole width of the coil.
    At first, kitchenware stamping line has been designed TO EXPLOIT THE WHOLE WIDTH OF THE COIL, reducing to the minimum distance to the strip edges,with a consequent REDUCTION OF THE SCRAP QUANTITY. Generally, we use 2mm as the distance. This reduction is realized avoiding the use of expensive and low flexible multiple dies.
    Since feeder for kitchenware can blank the whole width of the strip, with this technology is therefore possible TO REDUCE FURTHER WORKING PHASES, such as the reduction of the coil into coils of smaller width (=slitting),then save further costs and the possibility of damaging the coil surface (especially with aluminum ). This mostly applied in press feeder for kitchenware and rotor and stator automatic stamping etc.
    LOW DOWN TIMES: when change the production size (diameter), only change die and change the setting of the HMI.
    WIDE PRODUCTION RANGE: the same line can blank different material, without any change or modification. The disk layout setting in the strip is no limit. Any punching path can be set by user.
  • Layout of Press Feeder -Kitchenware Stamping Line
  • 01
  • Composition of The Press Feeder Line
  • 02
  • 1500mm Heavy Uncoiler with Zigzag Movement
  • 03
  • The uncoiler mandrel can run clockwise and anti-clockwise, pneumatic brake. Equipped with press arm to press material and cantilever with rack to support heavy coiler.
  • 10T Automatic Loading Car
  • 04
  • Composed of lifting V platform and movable base, It can move back and forth, and vertical lifting is available. Easy to realize the automatic load and unload the material.
  • Material Guide and Support Bridge     
  • 05  
  • There is photo-electric sensor to control the uncoiler speed, Ensure that the material loop has sufficient length storage.
  • Straightener Feeder
  • 06
  • 07
  • Straightener and feeder combined together.
    Straightener controlled by motor with inverter.
    Feeding material and swing move controlled by servo motor.
  • Electrical Control System
  • 08
  • Main electrical components are brand of Siemens and Schneider.
  • HMI: Length set sample
  • 10
  • 11
  • Hydraulic system                      
  • Pneumatic system                      
  • Lubrication system                    
  • Key parameter of the machine
  • Feeding length: 50mm—10000mm
    Feeding tolenrance:200mm±0.05mm 、300mm±0.1mm 、700mm±0.15mm
    Zigzag tolerance: L=200mm±0.05mm 、500mm±0.2mm 、1000mm±0.3mm
    Punching speed: 30~45(depends on the diameter of the disc)
    Inspection standard: 0.5mm thinkness stainless steel



Straightener GLL Series
Hydraulic Heavy Decoiler MTC Series
Precision Straightener (Double-section model) DSL Series
Precision Straightener (Single-section model) JM3 Series
3 in 1 Decoiler Straightener Feeder NCHW5A (stock thickness 1.0~9.0mm)
1300 Model Swing Shear Type Cut To Length Line
Multi - Process Transfer System - Frame Moving Model
3D Transfer System