contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

  Lbs.
Minimum :
Maximum :
Minimum :
Maximum :
Lbs.
Lbs.

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo

Brief Introduction:
It was automatic blanking line exported to Russia which mainly used to product bowls. The manipulator pick up work piece from destacker then put on conveyor belt then go through the double side oiling device to roll oil on surface and then put to mould, finished processed product was pushed out of the bolster.

Comprising of the feeding line
1. Auto destacker: 1set
2. Oil lubrication device: 1set
3. Manipulator device: 1set
4. Control box: 1set

Hydraulic Press Stretching Manipulator 02 Hydraulic Press Stretching Manipulator 02
Hydraulic Press Stretching Manipulator 03 Hydraulic Press Stretching Manipulator 03
Hydraulic Press Stretching Manipulator 04 Hydraulic Press Stretching Manipulator 04
Hydraulic Press Stretching Manipulator 05 Hydraulic Press Stretching Manipulator 05
top