contact us

看不清,请点击我!

If you would like to leave us a comment please go to

Contact Us

contact-clo
  • Hydraulic Press feed 2 in 1 Decoiler Straightener

2 in 1 Decoiler Straightener RHW Series (stock thickness 1.0~6.0mm)

  • Model: RHW (Suitable for material thickness: 1.0~6.0mm)
  • Place origin: China
  • Warranty date: 1 year
  • Certification: CE
  • Installation and debugging: Engineers onsite technical support is available.
  • Package: plywood case/film
  • Price terms: FOB SHENZHEN or other Chinese port etc.
  • Payment terms: T/T, L/C etc.
  • MOQ: 1 set
  • Delivery: 30-60 days
  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

PRODUCT DETAIL

Features


  • Introduction
  • 1. Suitable for 1.0-6.0mm thickness low carton steel, stainless steel, Aluminum, Copper/brass etc. coil auto feeding.
  • 2. Decoiler can be powerless type, straightener’s rollers pull through strips forwards. Decoiler also can add a set AC motor WITH CLUTCH so as to decoiler can switch between motorized and powerless. At manual model, it can be switched to be motorized, decoiler can rotate in clockwise and anti-clockwise, it’s convenient to payoff coil head and insert strip head into straightener’s entrance at the assistant of bend arm device. After machine is ready to Auto feeding condition, it can switch to be powerless and strip will be pulled to payoff from coils.
  • 3. It equips with 9pcs straightening rollers+ 2pcs pinch rollers+ 2pcs feeding rollers for straightener part. All rollers adopted solid 40Cr material, finished tempering and quenching, hard chrome plating, grinding etc. Roller surface comes 58-62°
  • 4. It adopted pneumatic cylinders to press pinch rollers and feed rollers, synchronous worm-gear device + 2 set handle wheels to adjust straightener gap, easy to adjust the straightener roller gap and easy to ensure straightening tolerance.
  • 5. It equips with HYDRAULIC bend arm device. Strip head were pressed down driven by hydraulic and come to straightener’s entrance, so as to easy and convenient to insert strip head into straightener part.
  • 6. Pneumatic press arm to press coil surface firmly, preventing coil getting too loose.
  • 7. Support arm device to support strip head, so as to convenient to insert strip head into straightener part at assistant of bend arm device.
  • 8. Decoiler’s mandrel adopts hydraulic expansion so as to it’s convenient to clamp coil firmly and automatically. It was comprised of hydraulic station, hydraulic cylinder etc. providing hydraulic source to expand and contact mandrel.
  • 9. DELTA/MITSUBISHI inverter equipped in the control box, machine’s running speed is adjustable, moreover, it also can well protect main motor, increasing machine’s life time.

Specification


Model

RHW-300

RHW-400

RHW-500

RHW-600

RHW-800

RHW-1000

Material Width (mm)

300

400

500

600

800

1000

Material Thickness (mm)

1.0~6.0

Coil I.D. (mm)

Φ460~520

Coil O.D. (mm) Φ1400
Max. Coil Weight (kg) 2000 3000 4000 5000 6000 8000
Mandrel Expansion Manual/Hydraulic

Pinch Rolls (mm)

Φ100×4

Straightening Rolls (mm)

Φ80× 9 (Upper 5/Lower 4)

Input Power 3Phase AC 380V/415V
Reducer Ratio 1/30

* The contents are subject to change without prior notice.

RELATED PRODUCTS

3D Transfer System
1300 Model Swing Shear Type Cut To Length Line
2 in 1 Decoiler Straightener ULB Series (stock thickness 0.4~3.5mm)
3 in 1 Decoiler Straightener Feeder NCHW1 (stock thickness 0.3~3.2mm)
Precision Straightener (Double-section model) DSL Series
 Straightener CLH Series
Precision Straightener (Single-section model) JM3 Series
Independent Manipulator Transfer System
看不清,请点击我!
top