contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

*
Thickest - Width x Thickness *
Thinnest - Width x Thickness *
Widest - Width x Thickness *
Narrowest - Width x Thickness
Tensile PSI *
Yield PSI *
Shear PSI *

B. Coils

  Lbs.
Minimum : *
Maximum : *
Minimum : *
Maximum : *
Lbs.
Lbs.

C. Press

Maximum SPM: *
Minimum SPM: * (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum : *
Minimum : *
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo

Brief Introduction:
It was a high speed coil feed line for metal sheet perforating line, the NCF-1000 model high speed double servo press feeder won China government rewards in 2013, Max. Feeding speed comes 400times/min, especially suitable for metal sheet perforating area.

Comprising of the perforating line:
1. Double servo press feeder: 1set
2. Precious metal sheet straightener: 1set
3. Heavy decoiler: 1set
4. Perforated use stamping dies with shear: 1set
5.  High speed power press: 1set

Machine main configuration:
1. For the high speed double servo press feeder. It equip with 2 set of servo driving device, one set is used to release upper feeding roller, the other is used to feed strips forwards. So the feeding and releasing speed is mush faster than ordinary servo feeder.
High speed metal sheet perforating line 06
2. Perforated use stamping dies with shear
We have very good cooperator who are specialized on metal sheet perforated use stamping dies, the mould is precious and reliable with long life time, perforated metal strips can be cut by the shear installed at the end of the stamping dies or rolled up by a recoiler machine in coils.

High speed metal sheet perforating line 07 High speed metal sheet perforating line 07
High speed metal sheet perforating line 08 High speed metal sheet perforating line 08
High speed metal sheet perforating line 09 High speed metal sheet perforating line 09
High speed metal sheet perforating line 10 High speed metal sheet perforating line 10
top