contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

*
Thickest - Width x Thickness *
Thinnest - Width x Thickness *
Widest - Width x Thickness *
Narrowest - Width x Thickness
Tensile PSI *
Yield PSI *
Shear PSI *

B. Coils

  Lbs.
Minimum : *
Maximum : *
Minimum : *
Maximum : *
Lbs.
Lbs.

C. Press

Maximum SPM: *
Minimum SPM: * (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum : *
Minimum : *
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo

Brief Introduction:
This is a compact cutting to length line exported to Portugal , material Max. width comes 1600mm, thickness suitable for 1-6mm, Max. Coil weight comes 10T, cutting length of 0.2-8m, feeding speed of 22m/min.

Comprising of the line:
1. NCHW3-1600A decoiler straightener feeder 3 in 1 machine: 1set
2. Double side plastic film covering device: 1set
3. Hydraulic shear: 1set
4. Roller type conveyor belt: 2set

Main feature of the cutting to length line:
1. Straightener and servo feeder was combined in one machine, driven by servo motor and controlled by PLC, It adopted ELECTRIC ADJUSTMENT to adjust the gap between upper straightening roller set and lower straightening roller set.
2. For decoiler part.
2.1 It equip with a set of hydraulic tailstock arm device to support one end of the main shaft, making the decoiler having large loading capacity. 
2.2 It equip with auto. Loading car. It can load can automatically lift the coil and install the coil on the mandrel of the decoiler, saving labor power and more safety.
3. For plastic film covering device. It’s an device to covering two sides of the strips with plastic film.
4. For roller type conveyor belt. Conveyor belt was comprised of a group of rollers, they were driven by motor via sprocket wheels and chains. Conveying speed is adjustable.

Portugal Shear Line 02 Portugal Shear Line 02
Portugal Shear Line 03 Portugal Shear Line 03
Portugal Shear Line 04 Portugal Shear Line 04
Portugal Shear Line 05 Portugal Shear Line 05
Portugal Shear Line 06 Portugal Shear Line 06
Portugal Shear Line 07 Portugal Shear Line 07
Portugal Shear Line 08 Portugal Shear Line 08
top