contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


Brief Introduction:
The automatic Aluminum coil feeding line consists of 3 in 1 decoiler straightener feeder NCHW1-600B and Aida press machine to make aluminum products in India. 


Main features of the aluminium coil feed line are as follows
1. The coil Straightener is equipped with 9pcs straightening rolls(upper 5/lower 4).

2. Flip Top Straightener Head. The top of straightener can be opened, which makes it easier to clean straightening rolls from stick scraps, impurity etc. This structure is especially suitable for soft material such as Aluminum, Brass etc(Soft material’s scrap is easy to stick on straightening rolls and cause product dents when stamping in dies).

3 in 1 uncoiler straightener feeder nchw1-6003 in 1 uncoiler straightener feeder nchw1-600