contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


NCHW-600D model 3 in 1 uncoiler straightener feeder ready to send out for Domestic client

  • source:Peter Zhang;
  • Time:01/16/2018

NCHW-600D model 3 in 1 uncoiler straightener feeder machine ready to send out. It equip with double limit arm device suitable for narrow strips and high tensile material. Further more, it adopted flip-top type machine head and electric straightening gap adjustment device. Easy to clean rollers and convenient to adjust machine's straightening action.


Double limit arm device


Flip-top device of machine head


Electric straightening gap adjustment