contact us


Quote Form



* If Quote is requested these Fields are Required.

A. Material

Thickest - Width x Thickness
Thinnest - Width x Thickness
Widest - Width x Thickness
Narrowest - Width x Thickness
Tensile PSI
Yield PSI
Shear PSI

B. Coils

Minimum :
Maximum :
Minimum :
Maximum :

C. Press

Maximum SPM:
Minimum SPM: (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum :
Minimum :
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)


NCHW2-600A model 3 in 1 uncoiler straightener feeder ready to send to INDIA

  • source:Peter Zhang;
  • Time:01/10/2018

On 3rd, January, the NCHW2-600A model 3 in 1 uncoiler straightener feeder machine was loading in a 20GP container and sent out to India, it was ordered by a Bangalore client.

For 3 in 1 machine, it was usually loaded and shipped in FCL, as it was large in size and heavy, so it don't suitable shipped in LCL. Small model loaded in 20GP, larger size using 40GP or 40HQ.

Usually the machine will be well packed by plastic film after tested in our facory and then fixed by steel wirerope in the container, small part sometimes will be packed in plywood case and then fixed in the container.

QQ--20180123133321 QQ--20180123133327