contact us

CONTACT US

Quote Form

(###.###.####)

看不清,请点击我!

* If Quote is requested these Fields are Required.

A. Material

*
Thickest - Width x Thickness *
Thinnest - Width x Thickness *
Widest - Width x Thickness *
Narrowest - Width x Thickness
Tensile PSI *
Yield PSI *
Shear PSI *

B. Coils

  Lbs.
Minimum : *
Maximum : *
Minimum : *
Maximum : *
Lbs.
Lbs.

C. Press

Maximum SPM: *
Minimum SPM: * (Give Minimum SPM at which tonnage can be maintained.)

D. Dies

Maximum :
Minimum :
Maximum :
Minimum :

E. Application

Maximum : *
Minimum : *
  SPM at Inch Length
  Feet Per Minute

(as you face the press)

Length Width Deep

F. Equipment Desired

1. Servo Feed
2. Straightener
3. Stock Reel
4. Coil Loading Car
5. Coil Cradle
6. Coil Loading Ramp
7. Hold Down Peeler
8. Threading Table
9. Central Control Console
10. Straightener Feeder
11. Straightener Feeder
12. Cradle Straightener Feeder
13. Other - Describe

G. Plant Utilities

  Volts Phase Cycle
  PSI

Other Conditions

Describe other operating conditions or requirements which would be helpful to the proper application of this equipment (i.e., automation level required, budgetary restrictions, etc.)

contact-clo

Brief Introduction:
2D transfer system were used to produce hardware in large quantity, products need to be processed in several steps, usually need to be banking, deep drawing, bending, piercing, forming etc, especially used in vehicle metal parts producing such as motor case etc.
2D transfer system: machine runs in two-dimensional space: X axis and Y axis. It runs 4 action in a circulation: snatch product →horizontal movement →release work piece →return.

Machine Main Configurations
1 For mechanical part: It was designed based on process of product and also need to consider no interference to the mould and press etc when at running. It was driven by several servo motor from YASKAWA/PHASE, lead screw and guide way come from HIWIN, TAIWAN, main rod exported from Germany etc
2 For electrical and electronic parts: It equip with YASKAWA/phase servo motor driver, BECKHOFF motion control unit, SCHNEIDER low voltage components etc.
Second Element Manipulator 02

Second Element Manipulator 03 Second Element Manipulator 03
Second Element Manipulator 04 Second Element Manipulator 04
Second Element Manipulator 05 Second Element Manipulator 05
Second Element Manipulator 06 Second Element Manipulator 06
Second Element Manipulator 07 Second Element Manipulator 07
Second Element Manipulator 08 Second Element Manipulator 08
Second Element Manipulator 09 Second Element Manipulator 09
top